close

[Solved] How to seaborn: Selected KDE bandwidth is 0. Cannot estimate density?

Hello Guys How Are You All ? Hope You all are fine. Today I Have Faced How to seaborn: Selected KDE bandwidth is 0. Cannot estimate density In Python.How to seaborn: Selected KDE bandwidth is 0. Cannot estimate density So Here I am Explain to you all the possible solutions Here.

Without Wasting your time, Lets start This Article to Solve This Error in Anaconda

How to seaborn: Selected KDE bandwidth is 0. Cannot estimate density error Occurs ?

import pandas as pd
import seaborn as sns

ser_test = pd.Series([1,0,1,4,6,0,6,5,1,3,2,5,1])
sns.kdeplot(ser_test, cumulative=True)

The above code generates the following CDF graph:


But when the elements of the series are modified to:

ser_test = pd.Series([1,0,1,1,6,0,6,1,1,0,2,1,1])
sns.kdeplot(ser_test, cumulative=True)

I get the following error:

ValueError: could not convert string to float: ‘scott’

RuntimeError: Selected KDE bandwidth is 0. Cannot estimate density.

What does this error mean and how can I resolve it to generate a CDF (even if it is very skewed).

Edit: I am using seaborn version 0.9.0

The complete trace is below:

ValueError: could not convert string to float: 'scott'

During handling of the above exception, another exception occurred:

RuntimeError                              Traceback (most recent call last)
<ipython-input-93-7cee594b4526> in <module>
      1 ser_test = pd.Series([1,0,1,1,6,0,6,1,1,0,2,1,1])
----> 2 sns.kdeplot(ser_test, cumulative=True)

~/.local/lib/python3.5/site-packages/seaborn/distributions.py in kdeplot(data, data2, shade, vertical, kernel, bw, gridsize, cut, clip, legend, cumulative, shade_lowest, cbar, cbar_ax, cbar_kws, ax, **kwargs)
    689         ax = _univariate_kdeplot(data, shade, vertical, kernel, bw,
    690                                  gridsize, cut, clip, legend, ax,
--> 691                                  cumulative=cumulative, **kwargs)
    692 
    693     return ax

~/.local/lib/python3.5/site-packages/seaborn/distributions.py in _univariate_kdeplot(data, shade, vertical, kernel, bw, gridsize, cut, clip, legend, ax, cumulative, **kwargs)
    281         x, y = _statsmodels_univariate_kde(data, kernel, bw,
    282                                            gridsize, cut, clip,
--> 283                                            cumulative=cumulative)
    284     else:
    285         # Fall back to scipy if missing statsmodels

~/.local/lib/python3.5/site-packages/seaborn/distributions.py in _statsmodels_univariate_kde(data, kernel, bw, gridsize, cut, clip, cumulative)
    353     fft = kernel == "gau"
    354     kde = smnp.KDEUnivariate(data)
--> 355     kde.fit(kernel, bw, fft, gridsize=gridsize, cut=cut, clip=clip)
    356     if cumulative:
    357         grid, y = kde.support, kde.cdf

~/.local/lib/python3.5/site-packages/statsmodels/nonparametric/kde.py in fit(self, kernel, bw, fft, weights, gridsize, adjust, cut, clip)
    138             density, grid, bw = kdensityfft(endog, kernel=kernel, bw=bw,
    139                     adjust=adjust, weights=weights, gridsize=gridsize,
--> 140                     clip=clip, cut=cut)
    141         else:
    142             density, grid, bw = kdensity(endog, kernel=kernel, bw=bw,

~/.local/lib/python3.5/site-packages/statsmodels/nonparametric/kde.py in kdensityfft(X, kernel, bw, weights, gridsize, adjust, clip, cut, retgrid)
    451         bw = float(bw)
    452     except:
--> 453         bw = bandwidths.select_bandwidth(X, bw, kern) # will cross-val fit this pattern?
    454     bw *= adjust
    455 

~/.local/lib/python3.5/site-packages/statsmodels/nonparametric/bandwidths.py in select_bandwidth(x, bw, kernel)
    172         # eventually this can fall back on another selection criterion.
    173         err = "Selected KDE bandwidth is 0. Cannot estimate density."
--> 174         raise RuntimeError(err)
    175     else:
    176         return bandwidth

RuntimeError: Selected KDE bandwidth is 0. Cannot estimate density.

Solutions

How to solve seaborn: Selected KDE bandwidth is 0. Cannot estimate density?

Question : How to seaborn: Selected KDE bandwidth is 0. Cannot estimate density?

Answer : What’s going on here is that Seaborn (or rather, the library it relies on to calculate the KDE – scipy or statsmodels) isn’t managing to figure out …

Solution : 1

What’s going on here is that Seaborn (or rather, the library it relies on to calculate the KDE – scipy or statsmodels) isn’t managing to figure out the “bandwidth”, a scaling parameter used in the calculation. You can pass it manually. I played with a few values and found 1.5 gave a graph at the same scale as your previous:

sns.kdeplot(ser_test, cumulative=True, bw=1.5)

See also here. Worth installing statsmodels if you don’t have it.

Solution : 2


if you don’t want to wait for the seaborn git update to get released in a stable version, you can try one of the solutions in the issue page. specifically henrymartin1’s suggestion to try manually passing in a small bandwidth inside a try/catch block (suggested by ahartikainen) which grabs the text of this specific error (so other errors still get raised):

try:
    sns.distplot(df)
except RuntimeError as re:
    if str(re).startswith("Selected KDE bandwidth is 0. Cannot estimate density."):
        sns.distplot(df, kde_kws={'bw': 0.1})
    else:
        raise re

Solution : 3


you have three options to try

first: showing KDE lumps with the default settings

sns.distplot(ser_test, hist = False, rug = True, rug_kws = {'color' : 'r'})

second: KDE with narrow bandwidth to show individual probability lumps

sns.distplot(ser_test, hist = False, rug = True, rug_kws = {'color' : 'r'}, kde_kws = {'bw' : 1})

third: choosing a different, triangular kernel function (lump shape)

sns.distplot(ser_test, hist = False, rug = True, rug_kws = {'color' : 'r'}, kde_kws = {'bw' : 1.5, 'kernel' : 'tri'})

Solution : 4

The problem occurs because of statsmodels.

Anyway, to solve the issue for seaborn version starting from 0.10.0, just place diag_kws={‘bw’: 1} as arg.

Try to figure out the optimal value for bandwidth.

Solution : 5

pip uninstall statsmodels solved a similar problem with the same error.

Summery

It’s all About this issue. Hope all solution helped you a lot. Comment below Your thoughts and your queries. Also, Comment below which solution worked for you?

Also Read: SyntaxError: invalid syntax to repo init in the AOSP code

Leave a Comment